Renovating a house: Costs, process & what a renovation really brings
- 1. Renovation vs. Refurbishment
- 2. What does a house renovation cost?
- 3. Facade, windows & sun protection
- 4. Roof & attic
- 5. Heating & building technology
- 6. Interior rooms - kitchen, bathroom & flooring
- 7. Planning a house renovation
- 8. Partial renovation or complete refurbishment?
- 9. Subsidies
- 10. Building permit
Many residential buildings in Switzerland date from the 1960s–1990s – and many of them have not been extensively renovated for decades. The result: rising energy costs, outdated building technology, unused potential and often a declining property value.
A renovation is therefore not just a cosmetic measure, but a long-term investment in comfort, energy efficiency and value retention.
This guide shows you what costs you realistically have to expect, which renovation steps make sense and when a complete renovation is worthwhile.
What is the difference between renovation and refurbishment?
The terms renovation and refurbishment are often used synonymously, but do not mean the same thing. The distinction is important because it affects costs, planning, process, permits and sometimes even subsidies.
Renovation (visual refresh):
A renovation primarily concerns the appearance of a house or apartment. The building structure is hardly or not at all changed. The aim is to aesthetically improve rooms or eliminate signs of wear and tear.
Typical renovation work includes: painting or plastering walls, renewing floors (parquet, vinyl, carpet), replacing doors, kitchen fronts or furniture, small cosmetic repairs, replacing surfaces without technical intervention.
In short, renovating means “beautifying”. It increases living comfort and appearance, but not necessarily energy efficiency or property value.
Refurbishment (technical/energetic renewal of the building structure):
A refurbishment goes deeper. Here, structural components are renewed, improved or technically modernized to increase the safety, energy efficiency and lifespan of the building.
Typical refurbishment work includes: facade insulation or new building envelope, replacing windows (e.g. triple glazing), roof renovation, renewing the roof structure, modernizing heating, electrics, plumbing, repairing moisture damage, mold or static problems, replacing pipes, etc.
Refurbishing means “technically renewing”. It improves energy consumption, building safety and value retention – often with great savings potential.
What does a house renovation cost? – The most important cost blocks
A house renovation can be very different in cost – depending on the age of the building, condition, choice of materials, energy technology and desired level of finish. To give you a realistic idea, here are the most important cost blocks with concrete guidelines and typical price ranges for Swiss single-family homes.
Facade, windows & sun protection – The building envelope as a major cost factor
Facade renovation & insulation
A new facade is more than just a fresh coat of paint. If insulation is added at the same time, the U-value of the exterior walls improves massively – often by more than 50%.
Typical costs:
● Facade insulation incl. new surface: approx. CHF 200 – 400 per m²
(depends on insulation material, insulation thickness, plaster/panel choice and scaffolding costs)
What determines the price? Type of facade (plaster facade, wood facade, fiber cement, metal), insulation material (mineral wool, EPS, wood fiber, mineral foam), thickness of the insulation (the thicker, the more energy-efficient – but more expensive) and effort for scaffolding and access to the building
Replacing windows
Windows are among the most efficient individual measures of a renovation. Modern triple glazing massively reduces heat loss and improves sound insulation.
Costs:
● CHF 500 – 800 per window (triple glazing incl. installation)
The price varies depending on the frame material (plastic, wood, wood-aluminum, aluminum), safety and sound insulation classes, special shapes (sloping windows, round windows).
Sun protection / blinds
Sun protection is often underestimated – but plays a central role in summer heat protection.
Costs depending on the system:
● CHF 500 – 1,500 per element (blinds usually cheaper than roller shutters or cassette awnings)
Roof & attic – One of the most expensive but important areas
The roof is one of the most stressed components and is a major factor in energy loss, moisture protection and durability.
Re-roofing
● A pure re-roofing costs CHF 100 – 150 per m²
● Total price single-family home: CHF 20,000 – 30,000
● Influencing factors: Tile type (clay, concrete, slate, metal), condition of the under-roof, roof shape (the more complicated, the more expensive)
Roof renovation (incl. timber construction)
In older houses, parts of the roof structure often need to be reinforced or replaced.
● Complete pitched roof renovation: CHF 30,000 – 60,000
● Renewal of roof structure: CHF 35,000 – 65,000
Roof insulation
Good roof insulation saves up to 20% energy.
● Prices: CHF 100 – 250 per m² – depending on the technology (under-, between-, on-rafter insulation)
Roof windows
● CHF 1,500–3,000 per element (incl. installation)
Heating & building technology – Often the biggest lever for energy savings
In many old buildings, heating systems are outdated or inefficient. Modernization greatly increases energy efficiency – especially in combination with an insulated building envelope.
Heating replacement
Typical guide prices incl. installation:
● Gas heating: CHF 25,000 – 30,000
● Oil heating: CHF 27,000 – 35,000
● Air/water heat pump: CHF 35,000 – 42,000
● Brine/water heat pump: CHF 50,000–60,000
Additional costs:
● New underfloor heating: CHF 200 – 250 per m²
● Compl. Renew electrics/cables: CHF 15,000 – 35,000
Heat pumps for single-family homes are more expensive, but often pay for themselves after just 8–12 years due to much lower operating costs and subsidies.
Interior rooms: Kitchen, bathroom & flooring
These areas determine living comfort the most – and are among the most emotional investments.
Install new kitchen
Depending on the equipment:
● Simple kitchen: CHF 15,000 – 25,000
● Medium kitchen: CHF 35,000 – 60,000
● High-quality luxury kitchen: CHF 60,000 – 100,000
Bathroom
The costs depend on the material and technology:
● Simple bathroom: CHF 1,000 – 1,500 per m²
● Medium bathroom: CHF 1,500 – 2,000 per m²
● Luxurious bathroom: CHF 2,000 – 3,000 per m²
Floor coverings
● CHF 100 – 200 per m²
(parquet is the most expensive, vinyl/carpet is the cheapest)
Get a house renovation quote
Free & without obligation
With just a few clicks, receive up to 3 house renovation quotes from certified specialist companies in your area.
How do you plan a house renovation sensibly?
Once the rough cost blocks are clear, it’s time for the actual planning. A renovation is always an interaction of many trades, and the better the work is coordinated, the cheaper and faster the project will be. The most important step is therefore a clear prioritization. In older houses, you usually start with the building envelope and the building technology, because that’s where the greatest energy losses occur and later interior renovations only make sense if the roof, facade and windows have already been renewed. A freshly painted living room is of little use if moisture penetrates through the uninsulated walls or drafts blow through old windows.
Another essential point is the analysis of the building structure. Many problems are not visible at first glance, as they are hidden behind cladding, in the screed or under the plaster. A professional inventory – ideally by a structural engineer or energy consultant – prevents expensive surprises during the renovation. The roof structure, pipes, seals, building technology, foundation areas and facade structure are checked. The earlier critical points are discovered, the better they can be integrated into the overall renovation.
The time factor also plays an important role. A complete renovation can often be implemented faster and in a more coordinated manner than a renovation in several stages. If different trades can work at the same time and not individual construction sites are created again and again over several years, the overall costs decrease. In inhabited houses, however, staging is worthwhile in order to keep the burden as low as possible. Many owners therefore opt for a combination: energetic measures in one go and visual renovations spread over several months.
When is a partial renovation worthwhile and when is a complete renewal?
Not every house immediately needs a complete renovation. Often the substance is so well preserved that individual measures are completely sufficient. If, for example, the facade is still intact but the windows are outdated, replacing the windows will already bring enormous improvements in the energy balance. A new heating system alone can also achieve great savings if the building envelope is at least in average condition.
A complete renovation is particularly worthwhile if several areas are at the end of their service life at the same time. If the roof, facade, windows, pipes and heating need to be renewed at the same time, there is a clear synergy effect: fewer construction sites, lower coordination costs and a harmonious modernization of the entire building technology. In addition, only a comprehensive renovation offers the possibility of bringing the house up to a contemporary standard in terms of energy – an advantage that pays off in the long term through lower heating costs and higher living quality.
A well-thought-out partial renovation is also attractive for owners with sales intentions. Houses with an energetically modernized envelope and renewed building technology achieve significantly better prices on the Swiss market. Buyers are increasingly paying attention to energy classes, heating systems and long-term operating costs, which is why energetically outdated buildings often stagnate or even lose value.
How do subsidies and taxes affect the overall costs?
Renovations are expensive – but in Switzerland, owners benefit from several financial advantages for energetic measures. The subsidies from the cantons are particularly important. They support projects such as facade insulation, roof insulation, window replacement and the switch to renewable heating systems. Depending on the measure, several thousand to tens of thousands of francs can be saved. The prerequisite is usually a U-value below a certain limit and the submission of the application before construction begins.
A renovation is almost always worthwhile from a tax point of view. Value-preserving investments may be deducted from taxable income throughout Switzerland. This applies to energetic measures as well as demolition costs, scaffolding, planning and a large part of the work carried out. Many owners use this opportunity to spread larger projects over two or three years, which breaks the tax progression and reduces the total tax burden.
In addition, banks are increasingly offering cheaper mortgage rates for energetic renovations. so-called “Green Mortgages” or “ECO-Mortgages”. They reward owners who modernize their building energy-efficiently with lower interest rates. Anyone who renovates the roof, facade and heating in one go can save additionally for many years.
Do you need a building permit for a house renovation?
A building permit is not required for every project, but many measures are subject to approval – especially those that change the external appearance or interfere with the statics. The replacement of a heating system is usually uncritical, while facade insulation, roof extensions, larger windows, dormers or terrace extensions must almost always be reported. Particular attention must be paid to regional regulations, for example in town centers, in listed buildings or in zones with clearly defined roof shapes.
Basically, the earlier you involve the municipality, the smoother the project will be. Many municipalities provide information in advance about which documents are required and what deadlines to expect. Anyone who builds without a permit risks expensive rework or construction stops – something that is consistently enforced in Switzerland.
A house renovation is one of the most valuable investments for owners
A renovation is a comprehensive process that requires time, budget and good planning. But the benefits are enormous: lower energy costs, better living quality, higher operational safety and a sustainable increase in the value of the property. Older houses in particular benefit disproportionately – energy losses can often be halved or even more. Subsidies and tax advantages provide additional relief, so that the effective costs are significantly lower than the pure investment amounts.
Anyone who plans specifically, sets priorities and compares different offers can not only modernize their house, but also make it fit for the next decades. A professional renovation is therefore not just a structural measure, but a long-term upgrade for comfort, efficiency and quality of life.
Get a house renovation quote
Free & without obligation
With just a few clicks, receive up to 3 house renovation quotes from certified specialist companies in your area.